TK48-51-PB1B MAZDA Front Right Rh Fender Molding End Cap CX-9

Review MAZDA Front Right Rh Side Fender Molding End Cap Panel Cover Oem for CX-9 CX9 2016–2023

Introducing the Mazda TK48-51-PB1B Front Right Rh Fender Molding End Cap Panel Cover for the Mazda CX-9 (model years 16-23), a crucial component designed to enhance both the aesthetic appeal and protective capabilities of your vehicle's fender.

Manufactured to Mazda's exacting standards, this OEM (Original Equipment Manufacturer) part is meticulously crafted from high-quality materials that ensure a perfect fit and finish. Its primary function is to shield the end cap of the fender molding from potential damage caused by road debris, harsh weather conditions, or minor collisions, thus preserving the overall appearance and structural integrity of your CX-9.

This Front Right Rh Fender Molding End Cap Panel Cover boasts a sleek and modern design, seamlessly blending with the contours of your Mazda's body. Its smooth, glossy surface not only complements the overall look of the CX-9 but also resists discoloration and fading due to prolonged exposure to sunlight.

Installation of this panel cover is an effortless process, thanks to its plug-and-play design. Simply remove the old, worn-out end cap, and replace it with the new one by securing it in place using the provided clips or screws. Once installed, you can rest assured that your Mazda CX-9 will retain its stylish and protective outer layer, providing you with peace of mind and an unmatched driving experience.

In summary, the Mazda TK48-51-PB1B Front Right Rh Fender Molding End Cap Panel Cover is an essential upgrade for any Mazda CX-9 owner seeking to maintain the appearance and functionality of their vehicle. With its OEM quality, reliable protection, and easy installation, this panel cover is an invaluable investment for those who take pride in the appearance and performance of their Mazda CX-9.

Mazda CX-9 Front Right Rh Fender Molding End Cap Panel Cover (TK48-51-PB1B) - A Comprehensive Analysis

The Mazda CX-9 is a popular midsize SUV known for its sleek design and efficient performance. Over time, the exterior parts of the vehicle can get damaged or worn out, and one such component is the front right rh fender molding end cap panel cover (TK48-51-PB1B). In this analysis, we will discuss the pros and cons of buying this replacement part.

1. Enhances the Appearance: A new fender molding end cap panel cover can significantly improve the look of your Mazda CX-9. It not only restores the original sleek design but also gives your vehicle a fresh and updated appearance.

2. OEM Quality: The Mazda TK48-51-PB1B fender molding end cap panel cover is an Original Equipment Manufacturer (OEM) part. This means it is designed and manufactured by Mazda, ensuring a perfect fit and finish.

3. Durable: OEM parts are known for their durability and longevity. The fender molding end cap panel cover is no exception. It is made of high-quality materials that can withstand the test of time and various weather conditions.

4. Protects the Fender: The end cap panel cover protects the fender from road debris, stones, and other external damages. It acts as a shield, preventing scratches and minor damages to the fender.

1. Cost: Replacement parts, especially OEM ones, can be quite expensive. The Mazda TK48-51-PB1B fender molding end cap panel cover is no exception.

2. Installation: Installing the new part can be a time-consuming and sometimes complex process. It may require special tools and expertise, leading to additional labor costs.

3. Availability: Depending on the location and availability, it might take some time to source and receive the replacement part.

The Mazda TK48-51-PB1B front right rh fender molding end cap panel cover offers several advantages such as restoring the vehicle's appearance, ensuring OEM quality, durability, and protection. However, it also comes with some disadvantages, including cost, installation, and availability.

If you are looking to restore your Mazda CX-9's exterior to its original condition, the TK48-51-PB1B fender molding end cap panel cover is a worthwhile investment. Weigh the pros and cons and consider the importance of the part's function and appearance in your decision-making process. If budget is a concern, you may want to explore alternative aftermarket options or consider repairing the existing part instead of replacing it altogether.

Details:

Warranty details can be found in the. Please bring a valid id and proof of purchase for pickup. We document serial numbers and take photographs before shipping. However, they may show signs of wear from previous use.

Item condition: all parts are thoroughly cleaned and inspected to ensure they in working order.

specifications autotrimguru:

• for models: Cx-9, Cx9
• for years: 2016–2023
• brand: Mazda
• mpn: Tk48-51-pb1b
• color: Black
• items included: -
• material: Plastic
• vintage part: No
• placement on vehicle: Front, Right
• type: Cover
• manufacturer warranty: 1 Month
• features: Easy Clean, Easy Installation
• finish: Matte
• country of origin: Japan

shipping autotrimguru:

• class: standard
• carrier: usps
• transit: 4-11 days
• service: usps ground advantage
• type: fixed

returns autotrimguru:

• policy: returns accepted
• paid by: buyer
• time: 30 days

offer autotrimguru:

• prices: $3.99–$20.50
• item condition:
  • New
  • Used
• sold #: 17
• started: november 21, 2025
• in stock #: 5
• availability: in stock
• options: ship-to-home
• best offers: true

seller autotrimguru:

• # reviews: 850
• city: pinellas park, florida
• rating: 99.8%

payments autotrimguru:

• credit card: discover
• wallet: google-pay
• other

general autotrimguru:

• category: Auto Parts > Car Truck > Interior Accessories > Trim